The T12 ST is an over-barrel design, developed for 6mm through to 300 Winchester Magnum and to accept barrel diameters up to 0.906″ (23.0mm).
- This design has a sealed expansion chamber which comes back over the barrel allowing for better weight distribution with dual barrel contact points resulting in optimum accuracy due to controlled barrel harmonics during firing.
- The threaded muzzle of the barrel winds into a barrel support spider located behind the groove seen on the outer tube. This aligns the muzzle to the bore of the moderator.
- Located at the rear of the moderator is a synthetic bush which creates a secondary support on the exterior of the rifle barrel.
- 5,000x round minimum service life (approx. life of a standard rifle barrel).
- Constructed using only quality corrosion resistant materials, with high resistance to flame degradation, retaining structual integrity.
- High corrosion resistance to salt water exposure.
- Internal geometry harnesses the energy of the gun-shot to keep the moderator tight on the thread shoulder, resulting in high level rifle accuracy and longevity of the product, eliminating the problems with a moderator unwinding leading to baffle strike.
- Shrink fit assembly and welded construction developed to resist high impact and abrasion.
- 2x point barrel support for enhanced accuracy.
- Reduced muzzle flash.
- Eliminating Blast Zones resulting from muzzle brakes.
- Improved recoil reduction to mitigate muzzle jump for solid target aquisition.
- Warranty: 3 years